Page 2
Induction Range (IR) Series
Induction Range (IR) Series
Electronics
2-2
#827176 - Revision A.2 - September, 2017
ELECTRONICS
This section describes the basic operation of the Induction Range (IR) Series electronics The oven and the cooktop
have separate control boards with different procedures, functions, and error codes.
INDUCTION COOKTOP
Touch Pads
Global Touch Pads
LOCK
- Locks or unlocks the entire cooktop. Touch and hold for 3 seconds. Acceptance beep when state
•
changes. Padlock is displayed when locked.
ALL OFF
- Disables entire cooktop. Red circle displayed when any coil assembly is energized.
•
“+”
- Adds time to the count down timer. Valid Selection beep to acknowledge touch.
•
“-”
- Decreases time to the count down timer. Valid Selection beep to acknowledge touch.
•
TIMER
- Activate and deactivate the timer. Valid Selection beep to acknowledge touch.
•
Control Zone Pads
ON/OFF
- Enables or disables individual control zone.
•
SIM
- sets power to level 1.
•
MLT
- sets power to level 1.
•
HI
- sets power to level 10.
•
BOOST
- sets power to Boost and adjusts adjacent power levels as required by the induction power sharing
•
scheme. Toggles Boost off if already engaged.
BRIDGE
- Activates vertically adjacent coil assemblies to same power level.
•
BRG
- Activates horizontally adjacent coil assemblies to same power level.
•
ALL BRIDGE
- Activates the four adjacent coil assemblies on the left side of the 36” model.
•
‘’ . . . .”
- Sets power to levels 2 through 9.
•
Annunciator
Adjust annunciator volume and frequency in user options mode. See Frequency Duration and Selection Chart
•
on the next page.
Cooktop must be in idle mode to adjust annunciator.
•
Factory default setting for volume is medium.
•
Factory default setting for frequency is medium.
•
Low frequency is 1.5 kHz. Medium frequency is 2.0 kHz. High Frequency is 2.5 kHz.
•
HOT Surface Display
LED is on when the cooktop glass temperature at any coil assembly Negative Temperature Coefficient thermis-
•
tor (NTC) reads greater than 149º F.
LED turns off when the glass temperature is below 122º F.
•
Independent of any control zone activation or the cooktop being in lock or showroom mode.
•
