Page 7
Electronics
Induction Range (IR) Series
Induction Range (IR) Series
2-7
#827176 - Revision A.2 - September, 2017
Valid Key Presses in Operational Mode
SIM
or
MLT
– Activates the control zone at power level 1.
•
HI
– Activates the control zone at power level 10.
•
BOOST
– Activates the control zone at power level Boost.
•
“…”
– Activates the control zone at a power level 2 through 9.
•
BRIDGE
or
BRG
activates adjacent coil(s) to same power level. Can be used to deactivate the bridge func-
•
tion leaving the individual zones active.
ON/OFF
– Retouch of same
ON/OFF
pad causes control zone to return to Idle Mode.
•
ALL OFF
– All active control zones return to Idle Mode.
•
Bridge and Coil Assembly Operational Mode Notes (See Figures 2-1 and 2-2)
If two coil assemblies are powered by the same generator board and the power demand between front and
•
rear coil assembly is greater than 3700 watts, the power level of both coil assemblies are reduced an equal
percentage to 3700 Watts combined output.
Turning off a coil assembly that is part of a bridge, turns off all coil assemblies in the bridge.
•
If the coil assembly is turned back on, the bridge has to be reset.
•
After a bridge is activated, any control zone part of the bridge can be used to adjust power levels.
•
If a horizontal or vertical bridge is activated while another bridge is active, the most recent command takes
•
precedence, activating the new bridge and shutting off the old bridge.
Boost Operational Mode Notes (See Figures 2-1 and 2-2)
During Boost coil assemblies on the same generator board have their power level adjusted.
•
If Boost is activated, a second touch of the
BOOST
pad deactivates Boost, returning the power level to Hi.
•
Boost can not be activated for control zones in a bridge.
•
Boost has an operational time limit of 15 minutes.
•
Boost on 15” model raise 2300 watt coil assembly to 3150 Watts. Maximum power level on 1400 Watt coil
•
assembly is approximately 50%, or 700 Watts.
Boost on 24” model raises rear 2100 Watt coil assembly to 3000 Watts. Maximum power level on front 2100
•
Watt coil assembly is approximately 50%, or 1050 Watts. Boost raises 2600 Watt coil assembly to 3150
Watts.
Boost on 30” model raises rear 2100 Watt coil assembly to 3000 Watts. Maximum power level on front 2100
•
Watt coil assembly is approximately 50%, or 1050 Watts. The 2600 Watt coil assembly is raised to 3150
Watts. Maximum power level on the front 1400 Watt coil assembly is approximately 50%, or 700 Watts.
Boost on 36” model raises either rear 2100 Watt coil assemblies to 3000 Watts. Maximum power level on
•
either front 2100 Watt coil assemblies is approximately 50%, or 1050 Watts. The 2600 Watt coil assembly is
raised to 3700 Watts.
Boost on the 2600 Watt coil assembly does not affect other coil assemblies on the 24” and 36” units.
•
Boost on the 2600 Watt coil assembly affects the 1400 Watt coil assembly on the 30” unit.
•
