Page 36
International Dual Fuel (ICBDF) Series
International Dual Fuel (ICBDF) Series
Component Access & Removal
4-6
#814889- Revision A - July, 2010
Infrared Burner Removal
After removing the components listed above, extract the
screws securing the IR weld assembly. Then, extract the
screw from the rear of the IR burner box. Lift the burner
box out by first sliding the IR weld assembly towards the
rear. Next, lift the IR weld assembly up and rest it on the
ECH shield. Disconnect the gas line from the brass ori-
fice elbow. Now, lift the IR burner out of the IR weld
assembly (
See Figure 4-8
).
IR Orifice Removal
The orifice is located in the brass orifice elbow, which is
threaded into the orifice holder at the front of the IR burn-
er. The IR weld assembly must be raised up and placed
on the ECH shield for access.
To remove the orifice, first disconnect the gas line from
the brass orifice elbow. Then, unscrew the elbow from
the orifice holder and extract the orifice from the elbow
with wrenches (See
Figures 4-9
and
4-10
).
Figure 4-10. IR Charbroiler Orifice Removal.
IR Charbroiler Orifice
Orifice Elbow
Figure 4-9. Flexible Gas Tube Removal.
