Page 26
International Dual Fuel (ICBDF) Series
International Dual Fuel (ICBDF) Series
Operation & Electronic Control
3-16
#814889 - Revision A- July, 2010
Delayed Start Feature
This feature controls the automatic timing of the oven’s
On and Off function. Set a cooking mode to start later in
the day and turn off when the cooking is complete or set it
to just to turn off at a preset time. See the Use & Care
Manual for additional information.
Set controls to start cooking later and automatically
turn off heat when finished.
To initiate Delayed Start Feature, turn oven control knob
bezel to the desired mode. Change preset temperature if
needed. (See
Figure 3-48
). Now, press COOK TIME key.
Then, press up or down arrow key on the display panel to
increase or decrease the desired cook time. Next, press
STOP TIME key. Then, press up or down arrow key on the
display panel to increase or decrease the desired stop time.
Now, press ENTER key. The oven will appear as though
it’s on (See
Figure 3-49
). The oven will turn on when clock
time displays start time. To exit Delayed Start Feature, turn
oven control knob bezel to OFF.
NOTES
:
•
Display appears as if the oven is on. One chime will
ring before the last minute of the cooking time. Three
chimes that repeat every 30 seconds signal end of
cooking time. The oven will turn itself off.
•
Do not delay the start when preheating is critical to the
cooking results.
•
The time-of-day clock must display the correct time
prior to programming a timed activity.
Probe Feature
The probe measures internal temperature by measuring the
internal temperature of food without opening oven door. It
is a convenient and accurate way to achieve perfect done-
ness regardless of the type, cut or weight of food.
Calculating a total cooking time by weight is no longer nec-
essary using this feature.
To initiate Probe Feature, preheat oven in desired mode.
Now, insert probe connector into receptacle, inside oven
cavity. Next, PROBE will appear on display panel. Probe
temperature is preset to 71°C (160°F) (See
Figure 3-50
).
To change temperature, immediately turn temperature read-
out knob to the right to increase probe temperature or to the
left to decrease probe temperature setting (See
Figure 3-
51
). Then, press ENTER key or after 2 seconds oven will
turn on by default. Probe temperature will flash in knob dis-
play when temperature has been reached (See
Figure 3-
52
).
To exit, turn oven control knob bezel to OFF.
NOTE
:
To change the temperature setpoint during probe
operation mode you must exit probe mode and restart with
new probe setpoint.
Figure 3-49.
Press COOK TIME Key. Next, Press Arrow Up or
Down Key To Set Desired COOK TIME. Press
STOP TIME Key. Press Arrow Up or Down Key
To Set Desired STOP TIME. Press ENTER Key.
177
Figure 3-48.
Set Control Knob
Bezel to Desire Mode
and Temp.
71
Figure 3-50.
Probe Temp. Preset
to 71°C (160°F).
74
Figure 3-51.
Turn Control Knob to
Set Desired Temp.
71
Figure 3-52.
Probe Temp. will
Flash when Temp. is
Reached.
