Service and maintenance
Sherpa 120, 140 | 06.19
141
Every week
Maintenance work
Performer
see
Conveyor belts
– Check outside and inside, drive components
(drive rollers, carrying rollers and pulleys), cover strips, bearings
and bearing housings for contamination; check for bumps in the
conveyor belt, damage, proper seating and functioning
Operator
–
Central lubrication (optional extra)
– Check for proper functioning
–
Do all lubrication points have a sufficient grease collar?
–
Is there sufficient grease in the reservoir? Top up reservoir
before reaching the minimum level.
Operator
► page 150
Fast-Cut cutting knives (optional extra)
– Check for deformation
and wear; readjust or replace them of necessary
Operator
Fast-Cut cutting knives (optional extra)
– Check slide plates 6 mm
for wear
–
in case of one-sided wear, turn slide plates over
–
in case of two-sided wear, replace slide plates
Operator
► page 195
Contamination indicator of hydraulic oil return-flow filter (at
hydraulic oil tank)
– Check
Operator
► page 169
–
in case of strong contamination, replace filter
Qualified staff
(Shop work)
–
Contamination indicator of hydraulic oil intake of feed pump (in
engine compartment)
– Check
Operator
–
–
in case of strong contamination, replace filter
Qualified staff
(Shop work)
–
Electrical lines
– Check for damage and proper installation
Qualified staff
–
Batteries
– Check for sufficient charge
Qualified staff
–
Dosage gate
– Check gap size
Qualified staff
► page 182
Antifreeze
– Check level (in winter period)
Operator
► Engine manual
Antifreeze in coolant system
– Check for sufficient antifreeze (in
winter period)
Qualified staff
► Engine manual
Windscreen washing water
– Top up
Operator
► page 170
Summary of Contents for Sherpa 120
Page 2: ......
