Service and maintenance
134
Sherpa 120, 140 | 06.19
9.2
Maintenance instructions
•
Special know-how is required for carrying out testing and
maintenance work, which is not communicated by these
operating instructions.
•
The maintenance intervals depend on the frequency of
use of the machine. The maintenance plan has been
tailored to medium stress exerted on the machine.
In case of higher loads and amount of stress,
maintenance work must be carried out at respectively
shorter intervals.
•
In case of doubt, the maintenance intervals, time
intervals and service hours specified in the sub-supplier
documentation shall prevail.
9.3
Lubricants and operating media
Component
Quantity
when
filled
Lubricant /
Operating
medium
Specification
Manufact
urer
Name
Milling drum
gearbox
1 l
Gear lubricant
oil
EP 80W-90
EP VG 220
(
–30 °C / +65 °C)
AVIA
ARAL
SHELL
TOTAL
MZ 80W *
EP Plus SAE 80W-90
Spirax A 90 LS
EP B 80W-90
Mixer gearbox
20 l
Front brake
driving axle
1.3 l +
14.5 l +
1.3 l
Hydraulic oil
tank
160 l
Hydraulic oil
Hydraulic oil
according to
HVLP DIN 51524
part 3
AVIA
MOBIL
Fluid HVI 46
DTI 10EXEL46
Fuel tank
180 l
Diesel fuel, low-
sulphur (ULSD)
Observe the latest specifications of the engine
manufacturer.
(Initially filled by the manufacturer with John Deere COOL-
GARD II)
Engine oil tank
15.5 l
Engine oil
Engine cooling
system
22 l
Coolant
AdBlue
®
tank
21 l
Diesel Exhaust
Fluid (DEF)
ISO 22241-1
–
AdBlue
®
AUS 32
Aqueous solution 32
Urea
NOx reducing agent
Catalyst solution
Lubricating
points
See
lubricatio
n plan
Grease
Lithium soap-based
multi-purpose grease
AVIA
Avialith 2EP
Tab. 10: Lubricants and operating media
*
Initially filled by the manufacturer
Summary of Contents for Sherpa 120
Page 2: ......
