Service and maintenance
Sherpa 120, 140 | 06.19
147
CAUTION
Sharp-edged cutting knives
Risk of cuts.
•
Wear cut-proof protective gloves.
•
Cover the cutting knives by means of an edge protector.
Operative staff:
•
Authorised workshop
Only authorised qualified staff is allowed to carry out
work in the mixing container.
1. Completely open the dosage gate of the discharge
opening through which you want to enter the mixing
container.
2. Secure the machine against accidental starting and
rolling.
3.
CAUTION
– Risk of cuts due to cutting knives. Rotate
the mixing auger such that the cutting knives are directed
away from the discharge opening.
4. Unscrew the screwed connections (3) between protective
cover (4) and mixing container (1).
5. Remove the screwed connections (2) of the swivel pin
and take off the protective cover (4).
6. Enter and leave the mixing container carefully through
the discharge opening or the discharge conveyor and the
discharge opening.
7. Cover the cutting knives by means of an edge protector.
8. Properly fix the protective cover (4) again at the mixing
container after finishing all necessary work in the mixing
container.
Fig. 105
Summary of Contents for Sherpa 120
Page 2: ......