Malfunctions
Sherpa 120, 140 | 06.19
125
8.2
Jumper
If the batteries are discharged and the engine cannot be
started, use jumper batteries.
WARNING
Risk of explosion due to battery gases
Fire, sparks, naked light and smoking are not allowed when
handling batteries.
•
Ensure that the pole pliers of the jumper cable do not
come into contact with each other.
•
When connecting the batteries, always connect the
minus pole (
–) last.
•
When disconnecting the batteries, always remove the
minus pole (
–) from the minus pole (–) first.
ATTENTION
Damage to the electrical system
•
Before connecting and disconnecting the batteries,
switch all consumers off.
•
When connecting the batteries, ensure correct polarity;
always connect the plus pole with the plus pole (+) and
the minus pole with the minus pole (
–).
•
Avoid short-circuiting caused by bridging with tools.
•
The jumper battery must provide a voltage of 24 volts
and about the same capacity (Ah) as the receiver battery.
•
Always use a jumper cable with insulated pole pliers and
a cross-section from 35 mm².
•
Start the diesel engine immediately after connection of
the batteries to avoid discharge of the jumper battery.
Operative staff:
•
Operator
Summary of Contents for Sherpa 120
Page 2: ......
