Service and maintenance
186
Sherpa 120, 140 | 06.19
Some cutting knives can be mounted in two positions:
•
Position (1) | retracted (factory setting):
– Less driving power required
–
Better loosening of bales
•
Position (2) | extended:
– More driving power required
–
Supports the discharge of highly structured mixtures
at the discharge opening
–
Better picking-up of bale components and their re-
inclusion in the intensive mixing process.
Fig. 146
1. Loosen the screws (2).
2. Change the position of the cutting knife (1) or replace
cutting knife.
– Positioning of individual cutting knives, ► see
page 185.
Fig. 147
3. Mount a knife supporting plate beneath the top cutting
knife of the mixing auger:
– Straight knife supporting plate (1) with the "Standard"
and "Straw" set of knives.
Fig. 148
Summary of Contents for Sherpa 120
Page 2: ......