Storz DUOLITH SD1 R-SW, Operating Manual

Page: 54 / 142

4-6
17 364 02 0320
Operation
4.4.2 Parameter selection and counter readings
Operating mode R-SW and F-SW parameter selection
The
PARAMETER SELECTION
field is used for displaying and setting the treatment
parameters. This is where you define the energy level as well as the number and fre -
quency of the pulses before each treatment.
Fig. 4-6 Setting parameters
Symbols Meaning
Set the energy level: increase / reduce
The set energy level is displayed
Setting nominal SW value: increase / reduce
The set number of shock waves is displayed
Nominal SW value set to '-' means SW limitation is
switched off
Set nominal frequency: increase / reduce
The set frequency is displayed
Table 4-2 Setting parameters
The desired energy level, nominal SW value and frequency can be achieved more
quickly by keeping the Increase/Reduce button pressed down.
Operating mode R-SW and F-SW ounter readings
The
COUNTER READINGS
field displays the number of pulses administered as well
as the energy output per F-SW treatment.
Fig. 4-7 Counter readings