Storz DUOLITH SD1 R-SW Operating Manual Download Page 104

Page: 104 / 142

5-4

17 365 02 0918

Status messages and tr

ouble-shooting

Printer not ready

Connect and switch on the printer.

USB stick was not recognised

Remove the USB stick, then switch off and
restart the device. Reinsert the USB stick.

Check that there is software on the USB stick.

If the fault persists, check that the USB stick
supports the USB V1.1 protocol. If it does
not, replace the USB stick.

5.2

Trouble-shooting

CAUTION!

Unplug the mains cable from the device before you carry out
any maintenance work!

Fault description

Possible cause

Corrective action

System does not work

Power failure

Defective mains fuse

Defective mains plug

Check the power supply.

Replace the fuses.

Replace the mains cable.

No compressed air
supply

Defective foot switch

connecting cable

Leaks in handpiece
cable or cable not

properly connected

Pressure setting
incorrect

Clogged compressor
air filter

Check the connecting cable

and change the foot switch if
necessary.

Check the connecting cable and

change the handpiece if necessary.

Check the pressure setting.

Check the compressor air filter
and replace it, if necessary.

Summary of Contents for DUOLITH SD1 R-SW















































































































































Search results

Summary of Contents for DUOLITH SD1 R-SW

Reviews:

Brands by name

Popular brands

Storz DUOLITH SD1 R-SW, Operating Manual

Search results

Summary of Contents for DUOLITH SD1 R-SW

Reviews:

Brands by name

Popular brands