Storz DUOLITH SD1 R-SW, Operating Manual

Page: 128 / 142

8-6
17 368 02 0320
Technical data, conformity and labelling
8.4.1 EMC guidelines and manufacturer’s declaration
Guidelines and manufacturer's declaration –
emitted electromagnetic interference
The DUOLITH ® SD1 model is intended for operation in the electromagnetic environment specified below.
The customer or the user of the DUOLITH
®
SD1 should ensure that it is used in such an environment.
Interference emission
measurements
Compliance Electromagnetic environment – guidelines
HF emissions acc.
to CISPR 11
Group 1
The DUOLITH ® SD1 uses HF energy only for its internal
functioning. Therefore, its HF emissions are very low and
are not likely to cause any interference in nearby electronic
equipment. According to EN IEC 60601-2-36:1997 Section
36 this does not apply during the generation and release of
the pressure pulse.
HF emissions acc.
to CISPR 11
Class B
The DUOLITH
®
SD1 is suitable for use in all establishments,
including domestic establishments and those directly
connected to the public low-voltage power supply network
that supplies buildings used for domestic purposes.
Harmonic emissions
according to I
EC 61000-3-2
Class A
Voltage fluctuations
/ flicke
r emissions
according to
IEC 61000-3-3
Complies