Storti husky DSS 90, Operation And Maintenance

Page: 67 / 109

13
EN
OPERATION AND MAINTENANCE
MT version (without cutter fig.2)
1
utility control (max. 5 levers)
2 fast connection pipes for subordinated circuit
DS Electric controls
(with cutter, fig. 3)
sect.2.6.1 CONTROL AND WORK STATION, DS VERSION
(with cutter, fig. 3)
All the controls for machine operation and registration are accessed from the
driver’s seat in the tractor.
The wagon must be manoeuvred by one operator only.
During work, the electrical controls must be placed inside the cabin (using the
proper support, D, fig.4).
When disconnecting the tractor from the mixing wagon, electrical controls
must be placed on the bracket (C, fig. 3) supplied on the wagon. The mount for
the control panel is adjustable to the most suitable position(s) (D, fig. 4).
C
D
fig.4
A
fig.1
sect.2.6 CONTROL AND WORK STATION, MT VERSION
(without cutter, fig. 2)
All the controls for machine operation and registration are
accessed from the driver’s seat in the tractor.
The wagon must be manoeuvred by one operator only.
The machine is supplied with a mobile bracket (A, fig. 1) that
couples with the tractor in order to fit the flexible controls which
are required during operation.
When the mixer wagon is disconnected from the tractor, the
flexible controls must be put back on the bracket (B, fig. 2) that
is mounted on the wagon and is locked by means of a split pin
(on request optional version with electrical controls
DINACOM LIGHT cod.65001132).
fig.2
2
fig.3
C
B
1