Storti husky DSS 90, Operation And Maintenance

Page: 107 / 109

53
EN
OPERATION AND MAINTENANCE
Sect. 6.16 TYRE REPLACEMENT
Place the machine on a flat stable surface.
Engage the parking brake of the tractor and remove the keys (if the machine is detached from the
tractor, place a wedge under the wheel opposite to the one that needs replacement).
Get off the tractor and place the jack in the position shown in the decal (1, Fig. 1).
Replace the tyre.
(wheels tightening torque: 340 Nm)
Note: Use jacks that are strong enough for the machine (refer to the technical specifications).
When using jacks, refer to the decal near the wheel for the correct position.
1
Sect. 6.17 HYDRAULIC HOSE REPLACEMENT
HYDRAULIC HOSES
When replacing the hydraulic hoses, they must be disposed of in compliance with the regulations existing in the country
where the machine is operated.
STORTI must be contacted to order a new hose or ask for help in hose replacement. The manufacturer shall provide instructions
to prevent useless pollution or bursting risks due to installation of parts that are not compatible with the intended use on the
machine.