Storti husky DSS 90, Operation And Maintenance

Page: 80 / 109

26
EN
OPERATION AND MAINTENANCE
2) Connect the cardan shaft of the wagon to the tractor PTO
The machine is supplied with a cardan shaft that couples with the tractor.
Consult the instruction manual before installing the cardan shaft between the machine and the tractor. Check that none of the
cardan shaft components are damaged; check that the tubes and crosses can move freely. Grease, if necessary.
AVOID SHARP TURNS WHEN THE CARDAN SHAFT IS ROTATING
NOTE:
before starting work, secure the chain
of the guards to the relevant hook on the
counter-cowling fig. 2 (this operation must be
performed after stopping the tractor and
removing the keys from the dashboard).
CAUTION: replace the guard immediately if
they are broken.
3) Exclusively connect the wagon plug
(part 1, fig. 3) to the supplied female cable
(part 2, fig. 3A, code 99452271) which connects to the tractor battery (part 3, fig. 3B).
(do not connect to other plugs on the tractor!!!!)
fig.2
fig.1
3
fig.3B
2 1
1
fig.3
2
2
fig.3A
5
fig.4
5
DELIVERY
BACKFLOW
4) Connect the quick connections (part 5, fig.
4) (hydraulic system and optional
hydraulic foot) to the tractor according to the
direction of the oil flow indicated by the arrows
in the decal affixed on the pipes.
The estimated pressure of the hydraulic
system is:
MAX 180 bar, MIN 120 bar.
fig.5
A
B
5) If necessary , move the plug inside the
cabin using the 3- or 5-pin extension cables
supplied with the electric control panel.
(parts code for 3-pin cable: 16820019, fig. 5
part A; parts code for 5-pin cable: 16820018
fig. 5, part B)