background image

2012 

RANGER

 RZR 570 / INTL

SERVICE MANUAL

FOREWORD

The information printed within this publication includes the latest product information at time of print. The most recent 

version of this Service Manual is available in electronic format at www.polarisdealers.com.
This Service Manual is designed primarily for use by  certified Polaris Master Service Dealer technicians in a p roperly 

equipped shop and should be kept available for reference. All references to left and right side of the vehicle are from 

the operator's perspective when seated in a normal riding position.
Some pro cedures ou tlined i n th is man ual re quire  a sou nd kn owledge  of me chanical t heory, to ol  use,  and sho p 

procedures in order to perform the work safely and correctly. Technicians should read the text and be familiar with the 

service procedures before starting any repair. Certain procedures require the use of special tools. Use only the proper 

tools as  specified. If you ha ve any doubt as to yo ur ability to perform any of th e procedures outlined in th is Service 

Manual, contact an authorized dealer for service.
We value your input and appreciate any assistance you can provide in helping make these publications more useful. 

Please provide any feedback you may have regarding this manual. Authorized dealers can submit feedback using 'Ask 

Polaris'. Click on 'Ask Polaris', and then click on 'Publications Question'.
Consumers, please provide your feedback in writing to: Polaris Industries Inc. ATTN: Service Publications Department, 

2100 Hwy 55, Medina, MN 55340.

Publication Printed November 2011 (PN 9923523) Rev. 3

© Copyright 2011 Polaris Sales Inc. All information contained within this publication is based on the latest product information at the time of publication. Due to constant 

improvements in the design and quality of production components, some minor discrepancies may result between the actual vehicle and the information presented in this 

publication. Dep ictions an d/or p rocedures  in t his pu blication  are int ended  for re ference use  only. N o  liability  can be accept ed for   omissions or inaccura cies. Any 

reprinting or reuse of the depictions and/or procedures contained within, whether whole or in part, is expressly prohibited. Printed in U.S.A.

Summary of Contents for 2012 RANGER RZR 570




















































































































































































































































































































































































































Reviews: