manualshive.com logo in svg

Stober 56690, Manual

Share
Download
Stober 56690 Manual Download Page 198

15 | Appendix

STOBER

198

05/2019 | ID 442790.01

15.4.4

Structure of the program interface

The DriveControlSuite commissioning software offers a graphic interface that you can use to project, parameterize and start
up your drive controller quickly and efficiently.

1

2

3

4

5

6

Fig. 32: DriveControlSuite: Program interface

1

Project tree

2

Project menu

3

Workspace

4

Parameter description

5

Parameter check

6

Messages

15.4.4.1

Individualized workspace

The project tree (1) and project menu (2) are connected and, like the parameter check and messages (5, 6), can also be
docked at the left, right or bottom edge of the screen. This program window can also be displayed or hidden using the 

View

menu.

The workspace (3) and parameter description (4) are also connected to each other and always positioned in the middle.
Both areas can be minimized or maximized.

Summary of Contents for 56690




























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands