Stober 56690 Manual Download Page 187

Page: 187 / 219

STOBER

14 | Service

05/2019 | ID 442790.01

187

Online

tab:

Click

Set all to read

in order to activate all drive controllers for read data synchronization.

Click

Assign all based on reference

to assign all drive controllers to the configured drive controllers.

Then click

Establish online connection

The data connection is established and the project configuration data is transmitted from the drive controllers to
the PC.

The drive controllers are created in the project tree and are active.

Then in the

Assignment and live firmware update

window >

Online

tab, click on

Set all drive controllers to offline (with

reverse documentation)

10. Confirm the

Reverse documentation

dialog box with

The connection is disconnected.

The drive controllers are write-protected (lock status with red R).

11. Save the project in a local directory and send the file to us.

Summary of Contents for 56690




























































































































































































































Search results

Summary of Contents for 56690

Reviews:

Brands by name

Popular brands

Stober 56690, Manual

Search results

Summary of Contents for 56690

Reviews:

Brands by name

Popular brands