Stober 56690 Manual Download

Page: 121 / 219

STOBER

10 | Commissioning

05/2019 | ID 442790.01

121

10.2.2.1

Define the axis model

Highlight the relevant drive controller in the project tree and click on the first projected axis in the project menu >

Wizard

area.

Select the

Axis model

wizard.

I05 Type of axis:

In order to configure the units of measure and the number of decimal places individually for specifying and displaying

position set values, velocities and accelerations, select 0: User defined, rotational or 1: User defined, translational.

If the units of measure and the number of decimal places for specifying and displaying position set values, velocities

and accelerations are to be fixed, select 2: Rotational or 3: Translational.

B26 Motor encoder:

Define the interface to which the motor encoder is connected.

I02 Position encoder:

Define the interface to which the position encoder is connected.

I00 Position range:

Define the travel range.

10.2.2.2

Scale the axis

Highlight the relevant drive controller in the project tree and click on the first projected axis in the project menu >

Wizard

area.

Select the

Axis model

wizard >

Axis: Scaling

Scale the axis by configuring the overall gear ratio between the motor and output.

To simplify this scaling for you, you are provided with the scaling calculator

Conversion of position, velocities,

accelerations, torque/force

, which calculates the effects of changed movement variables on the entire system.

I06 Decimal places position:

If you have selected 0: User defined, rotational or 1: User defined, translational when defining your axis type, specify

the desired number of decimal places in this parameter.

I09 Measure unit:

If you have selected 0: User defined, rotational or 1: User defined, translational when defining your axis type, specify

the desired unit of measure in this parameter.

Information

Note that a change to parameter I06 moves the decimal sign for all axis-specific values!
Ideally, change I06 before parameterizing other axis-specific values and then check them afterwards.

Summary of Contents for 56690




























































































































































































































Search results

Summary of Contents for 56690

Reviews:

Related manuals for 56690

Brands by name

Popular brands

Stober 56690, Manual

Search results

Summary of Contents for 56690

Reviews:

Related manuals for 56690

Brands by name

Popular brands