Still KANVAN-05 Original Instructions Manual Download

Page: 87 / 164

Operation

Lifting

Lift controls

Extending and folding forks

CAUTION

It is expressly forbidden to pull a trailer when the

elevation function is in use.

CAUTION

Make sure there is sufﬁcient space to extend the

forks.

– To extend the forks, the operator MUST

use the presence pedal and simultaneously

press the two buttons (2) until the forks are

fully deployed.

CAUTION

Check that the forks are correctly extended before

using traction.

NOTE

The fork extension phase is fully complete

when the forks are in the horizontal position

and the actuator piston is fully retracted.
The fork carriage may only be raised when the

fork extension is fully complete.

CAUTION

It is not permitted to step onto the forks.

CAUTION

Check that no objects are placed on the forks before

folding them.

50108043033 [EN]

Summary of Contents for KANVAN-05





































































































































































Search results

Summary of Contents for KANVAN-05

Reviews:

Related manuals for KANVAN-05

Brands by name

Popular brands

Still KANVAN-05, Original Instructions Manual

Search results

Summary of Contents for KANVAN-05

Reviews:

Related manuals for KANVAN-05

Brands by name

Popular brands