Still KANVAN-05 Original Instructions Manual Download

Page: 36 / 164

Safety

Deﬁnition of responsible persons

and safety gloves) suited to the operating con-

ditions, the job and the load to be lifted. The

driver must wear safety footwear for driving

and braking in complete safety.
The drive must be familiar with the operating

instructions, which must remain accessible at

all times.
The driver must:
• Have read and understood the operating

instructions

• Know how to operate the truck in complete

safety

• Be physically and mentally capable of

driving the truck safely

DANGER

The use of drugs, alcohol or medications that have

an effect on reactions impair a person’s ability to

drive the truck!
Individuals under the inﬂuence of the aforementio-

ned substances are not permitted to perform any

work on or with an industrial truck.

Prohibition on use by unauthorised

persons

The operator is responsible for the truck during

working hours. He must prohibit any operation

of the machine by unauthorised persons.
When leaving the truck, the driver must secure

it against any unauthorised use.

50108043033 [EN]

Summary of Contents for KANVAN-05





































































































































































Search results

Summary of Contents for KANVAN-05

Reviews:

Related manuals for KANVAN-05

Brands by name

Popular brands

Still KANVAN-05, Original Instructions Manual

Search results

Summary of Contents for KANVAN-05

Reviews:

Related manuals for KANVAN-05

Brands by name

Popular brands