Still KANVAN-05 Original Instructions Manual Download

Page: 78 / 164

Operation

Driving

in accompanied mode with cockpit, slow

forward travel using the throttles", P. 5-72

• Driving, pedestrian mode, traction but-

ton (option), see ⇒ Chapter "Driving in

pedestrian mode with backrest push but-

tons", P. 5-75

123

456

789

PRG

1044_501-001

Driving, ride-on standing mode

– Stand upright, with feet placed in the

presence zone (1) of the platform.

NOTE

The truck must be activated.

WARNING

The platform ﬂoor must be kept free of any object

that could activate the operator presence mat by its

weight.

WARNING

Wait until the truck has completely stopped before

dismounting it. Always dismount the truck on the

non-travelling side.

50108043033 [EN]

Summary of Contents for KANVAN-05





































































































































































Search results

Summary of Contents for KANVAN-05

Reviews:

Related manuals for KANVAN-05

Brands by name

Popular brands

Still KANVAN-05, Original Instructions Manual

Search results

Summary of Contents for KANVAN-05

Reviews:

Related manuals for KANVAN-05

Brands by name

Popular brands