manualshive.com logo in svg

Still KANVAN-05, Original Instructions Manual

Introducing the "Still KANVAN-05" - your ultimate companion in efficient material-handling operations. Enhance your workflow with this state-of-the-art equipment. For a seamless user experience, don't forget to download the Original Instructions Manual from manualshive.com. Obtain the manual for free and unlock the full potential of your Still KANVAN-05.

Share
Download
background image

Table of contents

g

1 Foreword

Your industrial truck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
EC declaration of conformity in accordance with Machinery Directive . . . . . . . . . . . . . . . 3
Information about documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Documentation scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Date of edition and latest update of this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Copyright and trademark rights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Explanation of symbols used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Explanation of the cross-references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Sample graphics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Environmental considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Disposal of components and batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2 Introduction

Technical description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Operating the truck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Intended use of the trucks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Approved applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Unintended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Place of use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Residual risks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Residual dangers, residual risks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Special risks arising from use of the truck and its accessories . . . . . . . . . . . . . . . . . . . . 18
Overview of hazards and countermeasures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Hazards to employees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

3 Safety

Definition of responsible persons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Operating company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Specialist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Expert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Basic principles for safe operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Insurance cover on company premises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Warning regarding non-original parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Modifications and refitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Medical equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

50108043033 [EN]

I

Summary of Contents for KANVAN-05





































































































































































Reviews:

No comments

Related manuals for KANVAN-05

Still RX70-40 Original Instructions Manual preview
RX70-40
Brand: Still Pages: 392
PETTIBONE Extendo 1032 Operator'S Manual preview
Extendo 1032
Brand: PETTIBONE Pages: 120
EP Equipment CPD30L1-B Service Manual preview
CPD30L1-B
Brand: EP Equipment Pages: 235
BorMann BWR5074 Manual preview
BWR5074
Brand: BorMann Pages: 6
ATLET A-Ergo Service Manual preview
A-Ergo
Brand: ATLET Pages: 250

Brands by name

Popular brands

Load more brands