Still KANVAN-05, Original Instructions Manual

Page: 101 / 164

Operation
5
Working with loads
The load must be placed and attached to the
lifting device so that it cannot slip or fall.
Loads must be stacked so that they do not
reduce the width of the aisle.
– Extend the forks, see ⇒ Chapter "Lift
controls", P. 5-79.
– Lift the forks.
– Approach the trailer at a moderate speed.
Slow down progressively and immobilise
the truck perpendicular to the trailer.
– Gently insert the forks up to the heel, without
coming up against either the trailer or the
load.
– Insert the forks as far under the load as
possible. Stop the truck when the back of
the fork touches the load. The centre of
gravity of the load must be located in the
middle of the fork arms.
50108043033 [EN] 93