Still KANVAN-05, Original Instructions Manual

Page: 131 / 164

Maintenance
6
Cleaning
1044_001-006
1
ponents that are sensitive to moisture (particularly
electrical components) must be protected if the
truck is to be cleaned. Follow the manufacturer’s
instructions when using the cleaning product.
– Clean the truck with a cleaning product
mixed with water (a sponge and cloths).
– Clean especially the oil filler holes and their
surrounding area as well as the lubricating
nipples, before lubrication.
– Lubricate the required locations (mast,
hinges and seals).
Note: The more the truck is cleaned, the more
it must be lubricated.
WARNING
Do not expose electric motors or other electrical
equipment to direct jets.
Cleaning the chain
CAUTION
The use of cold or chemical detergents, as well as
acidic and corrosive or chlorine-based liquids can
damage the chain.
– Clean the chain with a paraffin derivative,
e.g. petrol (follow the manufacturer’s
instructions).
– When cleaning with a steam jet, do not use
additives.
– Dry the chain immediately after washing
using compressed air. Move the chain
so that the remaining water can leave the
joints.
– Lubricate the chain immediately with the
S aerosol for chains and move the chain
again.
WARNING
Do not expose electric motors or other electrical
equipment, brakes and bearings to direct jets.
50108043033 [EN] 123