Still KANVAN-05 Page 100 Original Instructions Manual Download

Page: 100 / 164

Operation

Working with loads

DANGER

Risk of injury!
– Do not step under the raised forks.

DANGER

People may be injured in the danger area of the

truck!
The danger area of the truck must be completely

clear of all personnel, except the driver in his

normal operating position. If persons fail to leave

the danger area despite warnings:
– Cease work with the truck immediately.
– Secure the truck against use by unauthorised

parties.

DANGER

Danger of death from falling loads!
– Never walk or stand underneath

suspended loads.

Transporting pallets or other contain-

ers

The load units (e.g. pallets) must generally

be transported individually. Simultaneous

transporting of several load units is only

authorised when:
• the safety conditions are fulﬁlled
• the technical requirements have been met
• speciﬁcally instructed by the supervisor
The operator must ensure that the load is

properly packaged. The operator must only

move loads that have been carefully prepared

and are safe.

Handling a load

Picking up a load
The truck can only handle pallets that do not

exceed the maximum dimensions. Faulty

loading accessories and loads that are poorly

stacked must not be handled.

50108043033 [EN]

Summary of Contents for KANVAN-05





































































































































































Search results

Summary of Contents for KANVAN-05

Reviews:

Related manuals for KANVAN-05

Brands by name

Popular brands

Still KANVAN-05, Original Instructions Manual

Search results

Summary of Contents for KANVAN-05

Reviews:

Related manuals for KANVAN-05

Brands by name

Popular brands