Still KANVAN-05, Original Instructions Manual

Page: 39 / 164

Safety
3
Safety tests
Safety tests
Regelmäßige Prüfung
(FEM 4.004)
nach nationalen Vorschriften
basierend auf den EG-Richtlinien:
95/63/EG, 99/92/EG, 2001/45/EG
Die Prüfplakette ersetzt nicht das Prüfprotokoll
Nächste Prüfung
56344391019
Mitglied der:
Fédération
Européene
de la Manutention
STILL GmbH Hamburg
0000_003-001_V3
Regular safety inspection of the truck
Safety inspection based on time and
extraordinary incidents
The operating company must ensure that the
truck is checked by a specialist at least once a
year or after particular incidents.
As part of this inspection, a complete check
of the technical condition of the truck must be
performed with regard to accident safety.
In addition, the truck must be thoroughly
checked for damage that could potentially
have been caused by improper use. A test
log must be created. The results from the
inspection must be retained until a further two
inspections have been carried out.
The inspection date is indicated by an adhe-
sive label on the truck.
– Arrange for the service centre to perform
periodic safety inspections on the truck.
– Observe guidelines for checks carried out
on the truck in accordance with FEM 4.004.
The operator is responsible for ensuring any
defects are remedied without delay.
– Contact your service centre.
NOTE
Observe the national regulations for your
country!
Electrical insulation test
The truck’s electrical insulation must have
sufficient insulation resistance. Insulation
resistance must be tested in accordance with
DIN 57117 and DIN 43539, VDE 0117 and
VDE 0510 at least once a year.
NOTE
The truck’s electrical system and the batteries
must be checked separately.
50108043033 [EN] 31