Still KANVAN-05 Original Instructions Manual Download

Page: 70 / 164

Operation

Commissioning

1044_505-002

After entering a digit, the display moves to the

next position. The display shows a ﬂashing

line (9) (the illustration shows an example).

NOTE

If the digit entered is wrong, it is possible to

cancel it by depressing the

PRG ↑

key (scroll)

(7).

1044_505-017

– The digit will be deleted and the ﬂashing line

(9) will reappear. It is now possible to enter

digits again.

– After the fourth digit has been entered,

conﬁrm this code by pressing

PRG ↲

(5).

The name of the truck manufacturer is

displayed. It is now possible to activate

the truck.

NOTE

If an error code is displayed, e.g.

E380

(10),

stop the truck by pressing the key (6) and carry

out the activation procedure again.

NOTE

It is possible to show the following displays by

repeatedly depressing the

PRG ↑

key (scroll)

(7).

• Hour meter ⇒ Chapter "Hour meter", P. 5-64
• Battery charging ⇒ Chapter "Battery

charge", P. 5-64

• Servicing interval management ⇒ Chap-

ter "Maintenance interval manage-

ment", P. 5-65

50108043033 [EN]

Summary of Contents for KANVAN-05





































































































































































Search results

Summary of Contents for KANVAN-05

Reviews:

Related manuals for KANVAN-05

Brands by name

Popular brands

Still KANVAN-05, Original Instructions Manual

Search results

Summary of Contents for KANVAN-05

Reviews:

Related manuals for KANVAN-05

Brands by name

Popular brands