25
Assembly roof-tile clamp
corrugated
Pay attention that the clamps are placed near an existing mounting
lath.
The holes for the fixation screws have to be pre-drilled with a 8 mm
borer.
The fixation of the clamps is realised by façade screws 6,5x100 mm
with sealing gasket.
Depending on the width of the substructure underneath the
corrugated roof covering the roof clamp can additionally be fixed
with a second fastening screw.
Completely mounted roof clamp ready for assembly of fastening
profiles.
If the roof clamps can not be mounted within the limits indicated (see “Spacing roof hooks”), you first have to mount
horizontal or vertical STI system profiles onto the roof clamp. Afterwards the added fastening profiles are mounted.
1410001 Roof-tile clamp corrugated V2
The roof-tile clamps corrugated are suitable for roofs with a wooden substructure.
