19
Assembly roof-tile clamps
Fix the roof-tile clamp with the support 50x150x5 mm using two
screws 5x60 mm.
Before roofing the covering tile has to be coarsly ground accordingly.
Finished mounting of screw as distance saver.
Caulk, if necessary, the coarsely ground brick with a foam tape
against water!
In addition to the grinding of the roof-tile we recommend to use a
screw that is mounted on the roof-tile clamp support as distance
saver.
Complete covered roof-tile clamp after covering.
Further roof-tile clamps in one row must be adjusted exactly
(e.g. by a line mark)
