30
Assembly wall console
If the console is mounted flush with the outer collectors, these will
be fixed with the enclosed mounting plates. Install the set located at
the upper end of the console in the holes.
1400006 Collector fastening set onto consoles
1400008 Collector fastening set onto console edge
Now install the next collector on the consoles.
Move the collector until the fastening plate “double” hooks into the
collector profile. Then fix the fastening plate.
Fix the upper and lower compensator with the clamp.
Before tightening of the screw the clamp must be positioned by
a rotary motion up and down Tighten the screw on the clamp only
oganually. The use of cordless drills or similar may cause damages
on the thread of the clamp. Tighten the clamp until the two lugs
superimpose in the whole length.
Finally, assemble the two outer fastening plates.
