15
Temperature sensor
Each collector has a sleeve for inserting a temperature sensor.
The sensor is positioned below the upper left manifold or next to
the label with the description „top“ on the outside of the collector
frame.
The sleeve for inserting the sensor is protected with a silicon
grommet which has to be centrally opened (using a knife or small
screwdriver) before inserting the sensor.
The insertion depth is limited to 4 cm. Furthermore, it is
recommended to protect the sensor against slipping out.
The temperature sensor can be inserted in any collector of
the installation.
The error of measurement of the recorded temperature
compared to the fluid temperature is ± 2 K.
