32
Arrangement
hydraulic connections
Cap
is mounted on all non-used collector connections.
1310009 Cap set (1 pcs. compl.)
1310109 Cap set (1 pcs. compl.) Al
Connection 3/4“
1310005 Collector connection set R3/4“
(2 pcs. compl.)
Connection for reductions
1310004 Collector connection set 22 mm
(2 pcs. compl.)
1310104 Collector connection set 22 mm Al
(2 pcs. compl.)
Air eliminator without extension
1310007 Air eliminator set without extension pipe
(compl. with caps)
Completely mounted air eliminator
All other connections as well as the covers are mounted in the same
way.
The required connection dimension must be calculated by the
designer of the installation, depending on local conditions (line
lengths, additional resistors etc.).
