stertil ST1175, Service Manual

Page: 22 / 108

Operation & Service Manual (VA) 22 ST1175
Only remove the covers to carry out maintenance,
ensure that the vehicle lift is disconnected from
the power supply.
Take care as burns can occur from touching hot
parts.
Prevent damage to the power feed cables on
account of driving over or heavy or falling objects.
Do not operate equipment with a damaged cord or
if the equipment has been dropped or damaged
until it has been examined by a qualified service
technician.
In case of using one or two lifting columns (in
paired operation), be sure that this will not result in
stability risks. In case of doubt, consult your
superior. Unsafe lifting can result in serious injury
and damage to the lifting system and/or vehicles.
This vehicle lift should only be used for lifting of
vehicles and not for other applications. The
positioning of the lifting system must be done in a
way that a safe working area will be obtained,
thereby creating escape paths for emergency
situations (leave passageways of at least 24").
For important vehicle technology please refer also
to the service manual.
If a vehicle is in the lifted position, its air
suspension system may not be used in a view of
possible change of track width and/or wheel base.