stertil ST1175, Service Manual

Page: 13 / 108

Operation & Service Manual (VA) 13 ST1175
2.12 Storing the manual
Stertil expects a copy of this manual to be available to the user(s), operators and
service engineer(s) of the vehicle lift and a copy should always be available when
installing, operating or maintaining the vehicle lift.
2.13 Recommissioning
In the event of a recommissioning (e.g. relocation of the machine or a transfer of
ownership), you MUST contact Stertil and subcontractor to discuss the
procedures, terms and conditions, service contract, etc., so that the proper
functioning and safety of the machine after recommissioning can be guaranteed.
If Stertil is not involved in a recommissioning, then Stertil is not liable for any
claims of third parties arising from that recommissioning.
2.14 Version history
Every effort has been made to make this manual as accurate and complete as
possible. However, should the user(s) find any errors or omissions, it would be
appreciated if these were brought to the attention of Stertil. Please report any
errors or omissions to Stertil.
Also, during the lifetime of the machine, engineering improvements may result in
the need to revise this manual. It is then at the discretion of Stertil, if a
revision/new version of this manual is required.
The following table describes the main changes for each document version of this
manual.
Version Date Changes Starting at serial No.
0 January
2000 Original edition TJ 67318
A July 2005 Control box changed TJ 81425