NOTE:
Service programming mode can be accessed by two methods.
Entering Programming Mode When Machine is OFF
1.
Remove front cover.
2.
Open control door.
3.
Press and hold the PROG switch on the control board, then press the ON key on the switch membrane keypad
(user controls on front of machine) to enter programming mode.
A.
Release PROG switch when display shows [ 88 ].
Entering Programming Mode When Machine is ON (Tank Temperature Displayed and Fill Cycle is Complete)
1.
Remove FRONT COVER.
2.
Open control door.
3.
Press and hold the PROG switch on the control board, then press the CYCLE key on the switch membrane
keypad (user controls on front of machine) to enter programming mode.
A.
Release PROG switch when display shows [ 88 ].
Programming Mode
NOTE:
Refer to SERVICE PROGRAMMING CHART.
1.
Change each function setting by pressing the (up arrow) switch on board until correct value is entered.
2.
Press the SELECT switch on the board to enter next function.
NOTE:
Pressing the OFF key on display keypad at any time during programming will store your selections.
Fig. 3
3.
To exit service programming and store your selections do one of the following:
A.
Press OFF key (machine will shut down).
B.
Press PROG switch (machine will stay on with tank temperature being displayed).
C.
Close control door.
D.
Check for proper operation by running one fill cycle and two normal cycles.
SD3 Series - SERVICE PROCEDURES AND ADJUSTMENTS
F45576 (1015)
Page 8 of 37
Summary of Contents for SD3 Series
