STERO SD3 Series, Service And Parts Manual

Page: 7 / 71

CONTROL BOARD PROGRAMMING
Feature Description Display Setting Display
Machine Type ty
Standard
1
Not Applicable in SD3
Sd
Not Applicable in SD3 fd
Not Applicable in SD3 GL
Not Applicable in SD3 AS
Not Applicable in SD3 HL
SD3 St
ID Id
Hot SD3 with Booster H
Chemical C
Plain SD3 No Booster P
Rinse Assurance tc
Yes
2
yE
No no
Manual Temperature Control tr
These parameters are not available for SD3. If either one of
these are displayed, return to MachineType and select [ St ].
Flow Options FL
Diagnostics override dG
Show Error Codes
2
1
Disable Error Codes 2
Shorted water thermistor
detections
SP
These parameters are not available for SD3. If either one of
these are displayed, return to MachineType and select [ St ].
1
Default setting.
2
This feature is not available on SD3 - Plain or Chemical models.
SERVICE PROGRAMMING
Certain procedures in
this section require electrical test or
measurements while power is applied
to the machine. Exercise extreme
caution at all times and follow Arc Flash
procedures. If test points are not easily
accessible, disconnect power and
follow Lockout/Tagout procedures,
attach test equipment and reapply
power to test.
SD3 Series - SERVICE PROCEDURES AND ADJUSTMENTS
Page 7 of 37 F45576 (1015)