SYMPTOM
POSSIBLE CAUSES
No display
1.
No power to machine. Fuse blown or circuit breaker tripped.
2.
Fuse F2 on relay board open.
3.
Missing 120VAC from 1T.
4.
Missing 11.5-16VAC from 2T to control board J1 1&3.
5.
Display board unplugged from control board or display board malfunction.
6.
Control board malfunction.
Machine will not fill. No error
code displayed.
1.
Door is not shut.
2.
Water not turned on.
3.
Door interlock malfunction.
4.
Door magnet missing
Machine will not wash. Tank
is filled with water. (Door
must be opened and closed
to start wash cycle.)
1.
Door switch malfunction. Verify DOOR LED on control board is on when
chamber door is closed.
2.
Tank float malfunction. Verify LOW LEVEL WATER LED on control board is on.
3.
Obstruction in pump.
4.
Motor overload tripped.
5.
Motor malfunction
Booster heater does not heat
at all.
1.
No water in dishwasher tank or float circuit malfunction
2.
No power to booster.
3.
Fuse blown in booster circuit or circuit breaker tripped.
4.
Contactor malfunction (3CON).
5.
Transformer malfunction 120VAC (1T).
6.
High limit thermostat(s) malfunction
7.
Thermistor malfunction
8.
Heater element malfunction
9.
Control board assembly malfunction
Rinse water temperature
does not reach 180°F.
1.
Heating element malfunction
2.
Incoming water temperature too low (minimum is 110°F).
3.
Voltage to booster heating circuit not correct.
4.
Incorrect heater being used.
5.
Booster heating elements coated with lime
Booster heater repeatedly
blows fuse or trips circuit
breakers
1.
Undersized fuse.
2.
Check wire and fuse size.
3.
Short circuit in internal wiring
4.
Incorrect voltage or heater
Booster heating element
burns out repeatedly
1.
Element powered with low or no water in booster.
2.
Check for correct heater and voltage. Verify with machine data plate.
3.
Contactor malfunction (3CON).
SD3 Series - TROUBLESHOOTING
F45576 (1015)
Page 36 of 37
Summary of Contents for SD3 Series
