STERO SD3 Series Service And Parts Manual Download

Page: 68 / 71

DOOR ASSEMBLY

ILLUS.
PL-AI3997

PART NO.

NAME OF PART

AMT.

0P-678169

Washer (SST).............................................................................................................................2

0A-108091

Spacer - Door Link (Lower)........................................................................................................2

0P-678169

Washer (SST).............................................................................................................................2

0P-678142

Stop Nut 5/16-18 Hex (SST)......................................................................................................2

0A-108097

Link - Door Handle.....................................................................................................................2

0P-678150

0P-678150..................................................................................................................................2

0P-678169

Washer (SST).............................................................................................................................2

0A-108090

Spacer Door Link (Upper)..........................................................................................................2

0B-108233

Handle - Weldment.....................................................................................................................1

0P-678169

Washer (SST).............................................................................................................................2

0P-678142

Stop Nut 5/16-18 Hex (SST)......................................................................................................2

0P-668017

Button - Bearing.........................................................................................................................4

0A-108087

Hanger - Counterbalance (Spring).............................................................................................1

0P-608088

Spring - Extension (Door)...........................................................................................................1

0A-108089

Hook - Spring.............................................................................................................................1

0P-678139

Nut 5/16-18 Hex (SST)...............................................................................................................3

0P-678169

Washer (SST).............................................................................................................................2

0P-678142

Stop Nut 5/16-18 Hex (SST)......................................................................................................4

0P-668017

Button - Bearing.........................................................................................................................4

0A-108096

Support - Handle........................................................................................................................2

0A-108257

Stiffener - Door Plate..................................................................................................................2

0C-108115

Door Assy. (LH)..........................................................................................................................1

0A-108013

Magnet.......................................................................................................................................1

0P-678141

Stop Nut 6-32 Hex (SST)...........................................................................................................2

0A-108095

Magnet - Mount..........................................................................................................................1

0B-108113

Switch - Reed (Interlock)............................................................................................................1

0P-678141

Stop Nut 6-32 Hex (SST)...........................................................................................................4

0P-528129

Connector - Strain Relief............................................................................................................1

0A-108083

Bracket - Magnet........................................................................................................................1

0C-108114

Door Assy. (RH).........................................................................................................................1

0P-678339

Cap Screw 5/16-18 x 1/2 Hex Hd. (SST)...................................................................................4

0P-678152

Cap Screw 5/16-18 x 1-1/4 Hex Hd. (SST).............................................................................AR

0P-678155

Mach. Screw 5/16-18 x 3/4 Truss Hd. (SST)...........................................................................AR

0P-678139

Nut 5/16-18 Hex (SST)............................................................................................................AR

0P-678165

Lockwasher 5/16 Helical (SST)...............................................................................................AR

0A-108302

Chamber - Weldment (Upper)....................................................................................................1

0A-108305

Bracket.......................................................................................................................................2

0A-108304

Door Assy. (Front)......................................................................................................................1

0P-578183

Guide - Door...............................................................................................................................4

0A-108578

Deflector, Splash Out, Door.......................................................................................................1

SD3 DISHWASHER REPLACEMENT PARTS

- 31 -

F-43302 Rev. B (October 2015)

Summary of Contents for SD3 Series








































































Search results

Summary of Contents for SD3 Series

Reviews:

Related manuals for SD3 Series

Brands by name

Popular brands

STERO SD3 Series, Service And Parts Manual

Search results

Summary of Contents for SD3 Series

Reviews:

Related manuals for SD3 Series

Brands by name

Popular brands