5-14
122998-741
Operator Manual
Cycle and Control Value Programming
6.
To generate a printout of reviewed cycle phases and values,
press
REVIEW CYCLE
touch pad. Display screen returns to first
phase of selected cycle:
CYCLE 6
HTW
PREWASH T=01:00
and printer records:
========================
CYCLE PROGRAM REVIEW
= CYCLE - CYCLE 6 =
========================
REVIEW TIME
5:18:25P
REVIEW DATE
4/24/92
UNIT NUMBER
3600000000
PHASE
TIME F
----------------------------------------------------
PRE-WASH
1:00
HTW
DET-WASH
5:00
140.0
RINSE 1
1:30
180.0
RINSE 2
1:30
180.0
F. RINSE
1:30
180.0G
EXHAUST
1:30
-----
-----------------------------------------------------
NOTE: At this point, user may either initiate selected cycle or exit
Cycle Review mode. To initiate selected cycle, press CYCLE/
START twice. To exit Cycle Review mode, press CYCLE MENU
touch pad. Control will exit mode and return display screen to
selected cycle menu.
7.
To by-pass printout option, press
STOP/RESET
touch pad. Con-
trol exits Cycle Review mode and display screen returns to
selected cycle menu.
CYCLE 5
CYCLE 6
CYCLE 7
CYCLE 8
__Indicates flashing position.
5.7 Extend Cycle
Phase Time
Cycle phase times may be temporarily extended by pressing
EXTEND CYCLE touch pad either while cycle is in progress or prior
to initiating cycle during cycle program review. Temporarily
extended phase times apply only to immediate cycle selected. On
completion of cycle, phase times return to programmed set points.
5.7.1 During a Cycle
1.
After starting a cycle, programmed time for each phase may be
temporarily extended only when particular phase process is in
operation.
CYCLE 6
182.7 F
RINSE 11:30
