4-4
122998-741
Operator Manual
Operating Instructions
3.
Press
SELECT CYCLE
touch pad until desired cycle name
flashes:
CYCLE 9
CYCLE 10
CYCLE 11
CYCLE 12
__Indicates flashing position.
4.
When desired cycle name is flashing, press
CYCLE/START
touch pad. Selected cycle name appears on screen and
remains displayed for five seconds:
PRESS START TO
PROCESS - CYCLE 10
5.
To start selected cycle, press
CYCLE/START
touch pad, a sec-
ond time while selected cycle name is displayed on screen.
NOTE: If touch pad is not pressed a second time while selected
cycle name is displayed, screen automatically returns to cycle
menu.
Once selected cycle is started, printer records:
======================
CYCLE - CYCLE 10
======================
CYCLE START
10:16:20A
CYCLE DATE
4/21/92
CYCLE NUMBER
0000002
UNIT NUMBER
0000000
PHASE
TIME
F
----------------------------------------------
6.
Washer automatically progresses through selected cycle as
described in the following section.
NOTE: During cycle, note the following:
1) Time displayed on screen counts down time remaining for
cycle phase in progress. If Temperature Guarantee feature is
selected, time displayed for that phase will only count down
when solution/water temperature in chamber sump is equal to
or greater than set point.
2) Cycle operation may be halted at any time by pressing STOP/
RESET once. To resume cycle operation at beginning of inter-
rupted phase function (i.e., fill, recirculate, drain), press
CYCLE/START. To abort cycle operation, press STOP/
RESET a second time.
WARNING – BURN HAZARD:
• Do not reach into sump.
• Wear appropriate Per-
sonal Protective Equip-
ment (PPE) including
gloves and face protec-
tion, open door slowly
and allow chamber and
load to cool when cycle is
complete. Hot steam may
escape through door
opening if door is fully
opened after cycle is com-
plete.
