Steris AMSCO 400 Series, Operator'S Manual

Page: 81 / 174

6-21
Sterilizer Operation Operator Manual P129394-020
6.12 SFPP Sterilizer
Cycles
AMSCO 400 Series SFPP Steam Sterilizers are shipped with the
factory-set cycles. The cycle sequence for these cycles is given in
S
ECTION
6.13 (prevac and gravity cycles are described in S
ECTION
6.9 , S
ECTION
6.10 and S
ECTION
6.11 ). Refer below, and to Table 2
(page iii) for factory-set, qualified cycle settings.
Important: Applicable cycles have been validated to satisfy the
requirements outlined in Table 1 and Table 2 . If cycle parameters
(sterilize time, dry time, temperature) other than those listed are
required, it is the responsibility of the healthcare facility to consult
and follow the device manufacturer’s written instructions.
NOTE: Contact your customer service representative for information
on a wide range of education/training programs designed to meet the
educational needs of healthcare industries.