Steris AMSCO 400 Series, Operator'S Manual

Page: 130 / 174

7-36
P129394-020 Operator Manual Cycle and Control Value Programming
c. At screen #27, select the appropriate print option by
pressing one of the touchpads on the display.
• DUPLICATE PRINT – The sterilizer provides a second
printout of the last previous cycle after the cycle
completes.
• NO DUPLICATE PRINT – This is the normal default
setting. The sterilizer does not provide an additional
printout at the end of the cycle.
d. Once the appropriate format has been selected, or if format
does not need to be changed, press EXIT to return to the
CHANGE MACHINE SETUP screen (#20).
2. Print Last Cycle
The control provides two ways of printing the last cycle run:
a. Print the Last Cycle: Select MENU from the main screen
(#0) then press PRINT LAST CYCLE touchpad on
screen #2.
b. After Cycle is Complete: Before opening chamber door,
press PRINT LAST CYCLE touchpad at Complete
screen #5.
7.18 Leaving Change
Values
1. Press EXIT at screen #20 to return to Menu screen #2.
2. Press EXIT at screen #2 to return to Status screen #1.
SELECT AUTOMATIC DUPLICATE PRINT STATUS
27
DUPLICATE
PRINT
NO
DUPLICATE
PRINT
EXIT