Steris AMSCO 400 Series, Operator'S Manual

Page: 121 / 174

7-27
Cycle and Control Value Programming Operator Manual P129394-020
7.9.2 Set up Generator Flush
when Automatic Utilities
Control Enabled
Auto utility control must be highlighted on utility control screen (#39).
Important: Sterilizer must be in auto utility shutdown screen (#40)
for flush to occur. Flush cycle will not occur if sterilizer is at
STANDBY screen (#0) at scheduled time.
Select GENERATOR FLUSH CONTROL at screen #49.
• Control advances to automatic generator flush cycle
scheduling screen (#49) when Automatic Utilities Control is
enabled.
• Screen #49 allows user to set up duration time. Default
duration time is 10 minutes.
1. Generator flush time is always automatic when AUTO UTILITY
SHUTDOWN is enabled. Flush automatically begins one hour
before restart time scheduled in auto utility shutdown. See
S
ECTION
7.8.2, A
UTOMATIC
U
TILITIES
C
ONTROL
,
ON PAGE
7-19 for
information on setting restart time of Automatic Utilities Control.
2. Use keypad to enter FLUSH duration time (5, 10 or 15 minutes).
Press EXIT to return to UTILITIES CONTROL screen (#39).
NOTE: If less than one hour before restart time when unit powers
up, then a flush cycle will not occur on that day.
Figure 7-10. Generator Flush Duration Time Control Screen
when Auto Utilities Enabled