Instruction Manual
59
Viewing Port VLAN Status
•
On the
Port VLAN Status
page, the following information will be displayed:
•
Port:
Displays the switch port number of the logical port.
•
Interface VLAN Mode:
Displays the current interface VLAN mode.
•
PVID:
Displays the current PVID.
•
Accepted Frame Type:
Displays the current access frame type.
•
Ingress Filtering:
Displays the current ingress filtering.
•
Uplink:
Displays the current uplink mode.
•
TPID:
Displays the current TPID.
Port to VLAN
Use the VLAN Static Table to configure port members for the selected VLAN
index. This page allows you to add and delete port members of each VLAN.
Adding a Port Member to a VLAN
1.
On the
Port to VLAN Settings
page, enter the following information:
•
VLAN ID
: Select VLAN ID from this drop-down list to assign VLAN
membership.
•
Port
: The switch port number of the logical port.
•
Interface VLAN Mode
: Displays the current interface VLAN mode.
•
Membership:
Select VLAN membership for each interface by marking the
appropriate radio button for a port or trunk:
•
Forbidden
: Interface is forbidden from automatically joining the VLAN via
GVRP.
•
Excluded
: Interface is not a member of the VLAN. Packets associated with
this VLAN will not be transmitted by the interface.
•
Tagged
: Interface is a member of the VLAN. All packets transmitted by
the port will be tagged, that is, carry a tag and therefore carry VLAN or
CoS information.
•
Untagged:
Interface is a member of the VLAN. All packets transmitted by
the port will be untagged, that is, not carry a tag and therefore not carry
VLAN or CoS information. Note that an interface must be assigned to at
least one group as an untagged port.
•
PVID:
Displays the current PVID.
