Instruction manual
7
4.
Attach the network switch to a magnetic surface.
5.
To power the switch, connect an external power adapter, wire the power
inputs, or do both.
6.
Connect RJ45 Cables to the
RJ45 Ports
on the enclosure.
Mount the Switch onto a DIN Rail
1.
With the flat side of the
DIN Rail
positioned against the network switch, line up
the holes on the
DIN Rail
with the holes on the switch.
Figure 3
DIN-rail screw
DIN rail
2.
Insert the
DIN-Rail screws
through the
DIN rail
and into the network switch.
(
Figure 3
)
3.
Tighten the screws.
4.
Hook the
DIN Rail
onto the top of the track, and push it against the track.
(
Figure 4
)
5.
To power the switch, connect an external power adapter, wire the power
inputs, or do both.
6.
Connect the RJ45 Cables to the
RJ45 Ports
on the enclosure.
Figure 4
