Instruction Manual
158
5. Select an
Action.
This field allows user to set which action will be applied if the PD
is without any response. The PoE Switch Series offers the following 3 actions:
•
PD Reboot
: It means the system will reset the PoE port that is connected to the
PD.
•
PD Reboot & Alarm
: It means the system will reset the PoE port and issue an
alarm message via Syslog.
•
Alarm
: It means the system will issue an alarm message via Syslog.
6. Enter a
Reboot Time (30 - 180s).
This field allows a user to set the PoE device
rebooting time as there are so many kinds of PoE devices on the market and they
have a different rebooting time.
7. Click on the
Apply
button.
Viewing changes to the PD Alive-Check
1.
On the PD Alive Check Configuration page, the following information will be
displayed:
•
Port:
The number of the port.
•
Mode:
Displays
whether the PD Alive Check function is enabled or disabled on a
per-port basis. By default, all ports are disabled.
•
Ping PD IP Address:
Displays the PoE device IP address.
•
Click the
Edit
button to manually edit the IP address.
•
Internal Time: Displays how long system should issue a ping request to PD
for detecting whether PD is alive or dead.
•
Retry Count: Displays the number of times system retries ping to PD.
•
Action:
Displays which action will be applied if the PD is without any
response
•
Reboot Time: Displays the PoE device rebooting time as there are so many
kinds of PoE devices on the market and they have a different rebooting time.
