Instruction Manual
120
•
SA MAC:
Select a SA MAC filter to apply to the ACE.
•
Any:
Filters all MAC Addresses.
•
User Defined:
Allows you to apply a filter to the MAC Address entered in
the SA MAC Value field.
•
SA MAC Value:
This field appears when a SA MAC value of
User Defined
is
selected, enter the MAC Address you wish to filter.
•
SA MAC Mask:
The SA MAC Mask is a 12 digit code made up of 0s and 1s.
•
0:
The corresponding MAC address will be included.
•
1:
The corresponding MAC address will be ignored.
•
VLAN ID:
Displays the VLAN ID.
•
802.1p:
Select whether to
Include
the 802.1p value.
•
802.1p Value:
Allows you to enter a 802.1p value (0-7).
•
802.1p Mask:
Allows you to enter the 802.1p mask that is applied to the VPT
(Virtual Path Terminator) tag.
•
EtherType:
Allows you to enter an Ether Type. The Ether Type is between the
range (0x05DD - 0xFFFF).
2.
Click the
Add
button.
Viewing MAC-Based ACE
•
On the
MAC-Based ACE Table
page, the following information will be
displayed:
•
ACL Name:
Displays the selected ACL List name.
•
Sequence:
Displays the ACL Rules sequence number.
•
Action:
Displays the ACE forwarding action, either
Permit
,
Deny
, or
Shutdown
.
•
Destination MAC Address:
Displays the destination MAC address.
•
Destination MAC Address Mask:
Displays the destination MAC address.
•
Source MAC Address:
Displays the source MAC address.
•
Source MAC Address Mask:
Displays the source MAC address mask.
•
VLAN ID:
Displays the VLAN ID
•
802.1p:
Displays the 802.1p value.
