Instruction Manual
21
Remote Syslog
The
Remote Syslog
page enables you to configure the logging of messages that
are sent to syslog servers or other management stations.
Sending a Message to Syslog
1.
On the
Remote Logging Setting
page, enter the following information:
•
Server Address
: Provide the remote syslog IP address of the switch.
•
Server Port
:
Provide the port number of remote syslog server. (Default Port
#: 514)
•
Severity
: The severity of the local log entry. The following severity types are
supported:
•
Emerg
: Emergency level of the system unstable for local log.
•
Alert
: Alert level of the immediate action needed for local log.
•
Crit
: Critical level of the critical conditions for local log.
•
Error
: Error level of the error conditions for local log.
•
Warning
: Warning level of the warning conditions for local log.
•
Notice
: Notice level of the normal but significant conditions for local log.
•
Info
: Informational level of the informational messages for local log.
•
Debug
: Debug level of the debugging messages for local log.
•
Facility:
local user 0~7
2.
Click the
Apply
button.
Deleting a Syslog Message
The
Remote Logging Setting Status
page, displays the settings for existing
messages.
•
On the
Remote Logging Setting Status
page, select the
Delete
button under
the
Action
field, next to the Message you wish to delete from the Switch.
