Instruction Manual
20
Viewing Logging Service Status
To view the current status of the Logging Service system.
•
On the
Logging Information
page, the
Information Value
field is show you
the current state of the Logging Service (enabled or disabled).
Creating/Editing a Log
When adding a new log you must first enable
Logging Service
on the switch.
1.
On the
Local Logging Setting
page, enter the following information:
•
Target:
The target of the local log entry. The following target types are
supported:
•
Buffered
: Target the buffer of the local log.
•
File
: Target the file of the local log.
•
Severity:
The severity of the local log entry. The following severity types are
supported:
•
Emerg
: Emergency level of the system unstable for local log.
•
Alert
: Alert level of the immediate action needed for local log.
•
Crit
: Critical level of the critical conditions for local log.
•
Error
: Error level of the error conditions for local log.
•
Warning
: Warning level of the warning conditions for local log.
•
Notice
: Notice level of the normal but significant conditions for local log.
•
Info
: Informational level of the informational messages for local log.
•
Debug
: Debug level of the debugging messages for local log.
2.
Click the
Apply
button.
Deleting a Log
•
On the
Logging Information
page, select the
Delete
button under the
Action
field, next to the log you wish to delete from the Switch.
